Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Seat Belt
Model Year: 2008 Model: Sequoia Doc ID: RM000003H4D000X
Title: SEAT BELT: REAR NO. 1 SEAT INNER BELT ASSEMBLY: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for the LH side and RH side.
  • The procedure listed below is for the RH side.

1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

(a) Remove the rear No. 1 seat assembly RH SEAT: REAR NO. 1 SEAT ASSEMBLY: REMOVAL (2008 Sequoia) .

2. REMOVE REAR SEAT CUSHION HINGE COVER NO. 3 SEAT: REAR NO. 1 SEAT ASSEMBLY: DISASSEMBLY (2008 Sequoia)+

3. REMOVE REAR SEAT INNER BELT ASSEMBLY

(a) Disengage the hook and loop fastener and hook.

(b) Remove the bolt and remove the rear seat inner belt assembly.